6x6cm Aperture Galvanized Gabion Box with 4.5 Daimeter Stone Basket
Introduction of Welded gabion box:
Welded gabions are wire mesh containers welded with high quality steel mesh. They can be filled on site with hard durable stone materials to form mass gravity retaining structures. Owing to their inflexibility, welded gabions can not adapt to differential settlement or be used in water courses. In comparison with woven wire gabions, welded gabions offer a higher strength. In order to meet different project requirements, various wire diameters and unit sizes are available for welded gabion boxes.
Material:
low caton steel wire, galvanized wire, stainless steel wire.
Wire Diameter:
2.7mm-6.0mm.
Surface Treatment:
Electro galvanized, Hot-dipped galvanized,Galfan coated, PVC coated.
Specification:
| Nominal Box sizes ( m) | No. of diaphragms (no.) | Capacity per box (m3) |
| 1.0 × 1.0 × 0.5 | Nil | 0.50 |
| 1.0 × 1.0 × 1.0 | Nil | 1.00 |
| 1.5 × 1.0 × 0.5 | Nil | 0.75 |
| 1.5 × 1.0 × 1.0 | Nil | 1.50 |
| 2.0 × 1.0 × 0.5 | 1 | 1.00 |
| 2.0 × 1.0 × 1.0 | 1 | 2.00 |
| 3.0 × 1.0 × 0.5 | 2 | 1.50 |
| 3.0 × 1.0 × 1.0 | 2 | 3.00 |
| 4.0 × 1.0 × 0.5 | 3 | 2.00 |
| 4.0 × 1.0 × 1.0 | 3 | 4.00 |
The Gabion Boxes of 50 x 50 x 50 cm and 100 x 50 x 50 cm are only suitable for garden applications and small groundturning and detached walls (a maximum height of 100 cm).
For projects bigger than the mentioned dimensions, the technical department should be contacted because of construction reasons and security reasons.
Variations in design:
There are various special designs of gabions to meet particular functional requirements and some special terms for particular forms have come into use.
For example,
Bastion:
a gabion lined internally with a membrane, typically of nonwovengeotextile to permit use of a granular soil fill, instead of rock.
Mattress:
a form of gabion with relatively small height relative to the lateral dimensions; commonly very wide. For protecting surfaces from wave erosion and similar attack, rather than building or supporting high structures.
Trapion:
a form of gabion with atrapezoidal cross section, designed for stacking to give a face that is sloping rather than stepped. The term is in wide usage, but in contexts related to gabions at least, appears to be a trademark registered by Betafence Limited.
Features:
1.Blends easily and harmoniously with the natural surroundings.
2.Low cost alternative to concrete or masonry structures.
3.Very high resistance to natural forces due to better tensile strength.
4.Simple and speedy installation, making it cost effective.
5.Quality finish and appearance is more aesthetically pleasing.
Application:
1. Control and guide of water or flood
2. Flood bank or guiding bank
3. Preventing of rock breaking
4. Water and soil protection
5. Bridge protection
6. Strengthening structure of soil
7. Protection engineering of seaside area.
Picture:
Product Tags:
|
|
6x6cm Aperture Galvanized Gabion Box with 4.5 Daimeter Stone Basket Images
|
