Galvanized Welded Wire Netting With 0 . 7 mm Wire Diameter and 3 Mesh
Product Introduction
Welded wire mesh, or welded wire fabric is a steel reinforcement material in concrete. The mesh is used for replacing the traditional "cut & bend" and placing of steel thermo-mechanical treated bars.Welded wire mesh is welded by high-quality low-carbon steel wire , then electro galvanizing, hot-dip galvanizing, PVC plastic coated ,surface passivation, plasticizing processing, flat surface, uniform mesh, solid solder joint, local good machining performance, stability, corrosion, and corrosion resistance.
Product Feature
The structure of this kind of wire mesh is strong, lasting and rest-resistant.
1. Electrical zinc coating welded mesh panel
First welding ,cutting the edge of the panel which can make sure the edge is smooth and not hurt your hands , electrical zinc coating, packing.
2. Pre Gal welded mesh panel
Use the hot dip gal wire direct do the welding, cutting the edge of the panel which can make sure the edge is smooth and not hurt your hands, packing.
3. Hot dip gal mesh panel
First welding, cutting the edge of the panel which can make sure the edge is smooth and not hurt your hands, hot dip gal, packing
Product Application
Guarding, Railings, Architectural, Ceiling Tiles, Partition Systems, Farm
6 x 6mm hole - Mouse protection
13 x 13mm hole - Fruit cages, bird protection, engineering uses
13 x 25mm hole - Bird protection, enclosures for small animals
20 x 20mm hole - Rat and squirrel protection
25 x 25mm hole - Fox protection, cat and dog enclosures
50 x 50mm hole - Fox protection, dog enclosures
Product Specification
Specification list of welded wire mesh |
Opening | Wire diameter (BWG) |
| In inch | In metric unit (mm) | |
| 1/4 x 1/4” | 6.4 x 6.4mm | 22, 23, 24 |
| 3/8 x 3/8” | 10.6 x 10.6mm | 19, 20, 21, 22 |
| 1/2 x 1/2” | 12.7 x 12.7mm | 16, 17, 18, 19, 20, 21, 22, 23 |
| 5/8 x 5/8” | 16 x 16mm | 18, 19, 20, 21 |
| 3/4 x 3/4” | 19.1 x 19.1mm | 16, 17, 18, 19, 20, 21 |
| 1 x 1/2” | 25.4 x 12.7mm | 16, 17, 18, 19, 20, 21 |
| 1-1/2” x 1-1/2” | 38 x 38mm | 14, 15, 16, 17, 18, 19 |
| 1 x 2” | 25.4 x 50.8mm | 14, 15, 16 |
| 2 x 2” | 50.8 x 50.8mm | 12, 13, 14, 15, 16 |
Technical notes:
1. Standard roll length: 30m
width: 0.5-1.8m
2. Special sizes: available at requests |
Product Tags:
|
|
Galvanized Welded Wire Netting With 0 . 7 mm Wire Diameter and 3 Mesh Images
|
